Basket Sedimentation Centrifuge Separator Is Used To Separate Suspended Liquid

Introduction

PSC type plate centrifuge is a closed sedimentation centrifuge. The material is added into the drum by the feeding tube on the closed cover. Under the action of centrifugal force, the material of different density is stratified, so as to achieve the effect of separation. PSC600 ordinary sedimentation centrifuge speed of 1800r/min, the maximum separation factor of 1088, by our company technology department research and development, on the basis of ordinary sedimentation centrifuge innovation, PSC600 high-speed sedimentation centrifuge speed up to 2500r/min, the maximum separation factor of 2100, It is suitable for the separation of materials with small difference in solid-liquid specific gravity and large viscosity, such as waste oil and oil residue separation.

Working Principle

There are no holes on the drum wall of the sedimentation centrifuge. The material to be separated enters the high-speed rotating centrifuge drum from the feed pipe, and forms an annular liquid layer under the action of the centrifugal force field, and the solid particles in it settle on the drum wall. , forming a sediment. The clear liquid is discharged through the pipette. At the end of the separation, the sediment is discharged manually or mechanically.

Product Usage

PSC series centrifuges are widely used, especially suitable for the separation of suspensions in centrifugal filtration when the filtration resistance is too large or the fine particles are lost too much because the solid particles easily block the filter medium. The sedimentation centrifuge can be used for the separation of crystallization, chemical sediment, coal powder and other suspensions, the dehydration of various sewage sludge, and the deslagging and clarification of animal and vegetable oils.

Technical Parameter